Test Required

Yes   No

Plant Type
(Coal, Oil, Gas, Hydro,  Incineration, Etc.)

Location of Expansion Joint

Flow Direction

Size

Pipe Size (Inside  Dimensions/Diameter of connecting Pip Flange)

in.

Installed Length (Inside  Dimensions/Diameter of connecting Pip Flange)

in.

Face to Face Dimension

in.

Flowing Medium

Medium (Air, Flue Gas, Liquid,  Slurry, Solid, etc. Is medium Corrosive, Abrasive or Viscous)

Velocity( In feet per  minute)

Elastomer (Carcass/Lining)

Carcass 

Lining

Temp.

Flowing Medium (operating  /maximum)

Operate F. 

Maximum

Surrounding Atmosphere (Min/Max)

Minimum  

Maximum

Time Duration at Maximum Temp.

Pressure

Operational (Acutal Pressure  System Works Under)

Pos. PSIG

Neg. H2

Design (Highest/Most severe  pressure expected during operation)

Pos. PSIG

Neg. H2

Surge (increased pressure due  to pump starts, valve closings, etc.)

Pos. PSIG

Neg. H2

Test (Hydrostatic test used to  demonstrate system capability)

Pos. PSIG

Neg. H2

Type (Constan t, Intermittent, Shock, Pulsating, etc.)

Movements

Axial Compression (Result of  pipe Extention-Expansion)

in.

Actual Extension (Result of  pipe contraction)

in.

Lateral Deflection

in.

Angular

degrees

Torsion

degrees

Vibration

F
    

A

Misc.

Pipe Flange Drilling (Indicate  specific standard, if special, provide: Flange O.D., Bolt, Circle, Number and  Size of Holes)

Specification

Mating Pipe Flange Thickness

in.

No. of Arches

Location of

Access

Retaining Rings (Are required  on all installations. Reusable, they do not need to be ordered with replacement or  spare expansion joints)

Yes    No

Control Unit Assemblies (Are  recommended for use in all expansion joint applications. Control units must be  used when piping support or anchoring is insufficient)

Yes    No

Flow Liners or Filled Arches

Yes    No

Name:
Company:
Address:
State:
Zip:
Email Address:

Comments: